Corsair RMX 2024 series im test

Corsair’s Bestseller is Zurück!

Corsair’s best-selling power supply – the RMx Series – is on the power supply stage. After launching the new Corsair RMX Shift with an automatic start using the ATX 3, it’s possible that this is one of the results of the 2021 RMX series being traded. We’ve never seen an RMX power supply from Corsair in 2024.

If you are entitled to one of the editors then the new Corsair RMX Series 2024 Power Parts, it is exclusively for a test that you can perform. The Corsair RMX Power Parts are connected to a power of less than 50 watts. Last is the efficient Power Parts at all and so it is possible to take the next official steps. We have found a complete modernization network in the Gold class with ATX 3.1 and a new look and tested it in a natural way that has led all paint models through time.

Three models to get you started

Also at RMX 2024 Corsair starts with three models with 750, 850 and 1000 Watts. There is no talk of a split or stronger model selection, information about this is still not available to us. The smaller models, the performance of the other RMX 2021 series weighs in enormous numbers, it is so credible that Corsair is no longer equipped. If you get started with ATX 3, it has become a straight model with a lighter performance for attractive prices. Most users use power supplies with 750 or more Watts.

The RMX Power Supplies have moved into the Gold class and lost the position of the HXI series. Corsair looks at the RMX ratings on an 80 Plus certification and puts statistics on Cybenetics. If you both have a Zertifikate Mitgeschleppt, of course double the cost was suffered.

ATX 3.1 with native 12V-2×6 connection

Bereits im watzten Test of Corsair RMx SHIFT Series RM1200x White hats we have written, that almost all ATX-3-Netzteile of Corsair automatically on the ATX3.1 Standard, although Corsair is not the 12-Pol-Anschussbuchse am Netzteil, undern Adapter with 2 x 8 Pol PCIe connection to 12VHPWR bzw. 12V-2×6-Stecker genutzt hat.

Now that the new RMX 2024 has started, Corsair is now the new optimized 12V 2×6 book, which has found a new graphics card. During some operations, where the Sense Pins in the book are prevented, the plug is not corrected in the embedded book and then overheat.

New look – New features

The new RMX 2024 from Corsair is no longer separated from the previous models and comes with new features. Interestingly, the standard brand names do not last here with Japanese 105 degree capacitors, ATX 3.1 and PCIe 5.1 support, fully modular cable design with Type-5 connector for all 140 mm FDB air and the new air control signal.

When the RMX 2024 Corsair put on a new chandelier, he now went down. Even the sinful Abdeckung der Lüfternarbe has shifted. Statistics have given Corsair a small written text and this page is packed. The new design dares the time to use Luftstrom.

New semi-passive mode with manual control!

Whoever has the most recent Corsair net parts brings the new RMX 2024 a semi-passive air suspension with that. The height of the 140 mm air is still a known burden.

A problem, if not, is a standard of the air and air flows in the best conditions or at the best temperatures. If the problem occurs during Corsair RMe 2023. The problem is often solved, while a long aftercare takes a long time, while the air at the Change of Load lasts less long. This was for example at Corsair RMX Shift to see.

With the RMX 2024 hat from Corsair there was a new complete air control device, which had never been controlled digitally, was a man as comfortable as the air curve equipment, but a new option that he brought.

Many power parts have a switch on the back, which deactivates the semi-passive mode. Corsair goes a step further and now passes that switch through a regulator. The high performance of the RMX 2024 report is one of the most important functions with a/off function. The human can switch off the semi-passive mode here and then the air manually reach its maximum speed.

I think the Netzteil has the minimum Drehzahl vor. If the Regler is aware, then he lets the air in the network down with the full Drehzahl. Imagine that the air comes out of the minimum threshold, so that it has such a long content, that the net value is a higher threshold not to stop and expel the previous time.

Man can pass a small threshold with the regulator, we will quickly die from an overload of the mains current. The function can no longer last, when the PC interior will be “vented” on the mains.

Technical details, specifications

With the new RMX 2024 series, Corsair is suitable for the usual single-rail design. All models work with a 12V battery, the jewels are loved by the mains voltage. The auxiliary voltages are very large with 150 watts. Corsairt looks at the mains part on the -12 voltage, which for a long time on ATX 2 mains parts optional war and only in completely special user search (old PCI sound cards, serial cutting sets)

Das Netzteil besitzt laut Hersteller follows Schutzschaltungen

• OVP (Overvoltage Protection)
• SCP (short circuit protection)
• OPP (Overload Protection)
• OCP (Overcurrent Protection)
• OTP (Over Temperature Protection)

The UVP protection is equipped with the new ATX 3.1 standard, which means the nuts will cause a war no matter what.

For the test of the power supply with the last display, the 80-Plus specification for the different Schienen-vorgesehen. If you act with a symmetrical display, a maximum taste of bean sprouts is created.

The diagram is intended to achieve the maximum amount of ampere current. This Verteilung entspricht im Test 100% Last. 0% Last message, that is the netzteil with jewels 0 Ampere Einstellung am Load-Tester läuft and completely the tensions of the single ones Schienen ohne sisterätzliche Last messages were. It is also a common sight with a voltmeter in Betrieb and the power supply in the learning environment.

Last version of the different models

Connection and cable

Our test equipment

If you want to achieve the smallest efficiency in the efficiency and thus a high-quality wool equipment, this extremely professional professional equipment is not possible. If the messages are such that the messages are so high, a correct execution of the performance in the display of others is just as possible. Gerade wo die Netzpartiles in the last years ever narrower zuammenrücken.

We are in Sachen Testequipment direkt vom Deutschen Chroma Service Center unterstützt. Chroma is on professional testing equipment for advanced efficiency and testing our know-how in the Sachen Messtechnik. The Messtechnik from Chroma gold-plated in Bereich der Netzteilproduktion and Qualitätscontrollle als Referenz.

Our Setup for the Network Part Tests is a self-compiled test and consists of the following components:

• Chroma 66202 Power Meter
• Chroma High-speed DC loads up to 3600 Watts

  • 10x Chroma 63303 at 300W
  • 4x Chroma 63302 Dual Load a 2×100 W
  • 1x Choma 63306 a 600W OPP/OCP test
  • 4x Croma 63301 a 200 watts in Reserve

• Chroma AC source 6420 2 KW
• Chroma AC Source 61505 4 KW PLD Simulation
• Keysight 34460A 6.5 Digit Multimeter with Voltage Control
• 4x Rigol DS1054Z Oscilloscope 4×4=16 channels
• Fluke 80i-110s AC/DC Current Supply (100 A) Inrush, Holdup etc.
• More information about Low-Voltage-Differential tasks etc. as well as various Small parts, Anschlüsse, Adapter usw.

The test equipment used is a proprietary and can be a self-built machine. It is not possible that a netzteilhersteller is managed and that no netzteilhersteller is sponsored. It will also be unreliable.