Metall 3D printing in a perfect Kennlinie

Construction and replacement part prototypes are flexibly, resource-efficiently and economically restored in additive form. If you use the right components, you must use the right components. Fronius Presents with CMT Additive Pro a revolution, 3D optimized swarf process, which with more smooth-running maintenance, higher quality and stability is surpassed. Some of the most extensive innovations that have to do with their know-how: my own prototype center was developed for a real Bauteil geometry, which is not so simple.

In the automotive, oil and gas industry, the air and gas industry, at Bau von Schiffen, Zügen and Baumaschinen they are in the workshop metal-3D-druck on the molding. Compared to original production processes with castings, chipboard or milling, here the requirement is a form and material light. This saves time and material and provided enormous flexibility in shapes and an inappropriate construction method.

Better handling and more flexible

In addition, where the degrees of individualization are high, the enormous potential can be increased. Some metal components can be used in the composite geometry, which can no longer be realized or cannot be realized. A control system is the description of prototypes (Rapid Prototyping), which makes the repair very easy, your product designs are quickly adapted and refined, before your mass production is carried out. Topology optimizations are also possible, which were not repairable with the original methods.

Metall 3D printing works with repairs and on-demand printing of various parts. Leaves Building Finish Just-in-time, soft drink Storage and costs fall. It became a huge challenge to increase and change the enormous scope of development, it was a burst and volatile time a bigger turn.

Die Pflicht: pure high-end Swiss technology

“Für a good metal 3D printing process is the result of the correct water treatment with the appropriate water parameters and processes”, explains Philipp Roithinger, Expert for Additive Fertigung at Fronius International. “Vorausetzung is a high-quality system that restores the selection of the Swiss riders.” With the new iWave Multiprocess Pro in combination with the optimal effect on the 3D-Metall-Druck-kennline knowledge of Fronius CMT Additive Pro, it works perfectly for other customized applications. Equipment for Refurbishment. This complete solution is with the help of robot systems for additive compatibility and is therefore a Vielzahl and Möglichkeiten.

The Kür: Exclusive 3D Features in a Kennlinie Vereint

With CMT (Cold Metal Transfer) Fronius has spent years on a stabilizing, control and comparative cooling process. World wide it could be that the 3D printing is used. After all, the Austrian Innovation Leader CMT has now optimized specifically for Metal 3D printing and the collected know-how in the development of Fronius CMT Additive Pro designed. The integrated Abschmelzraten-Stabilizer which has a constant load was a problem and the lagenaufbau effect. The stability of the manufacturing processes is improved.

“A new new fact is the regular heat and knitting relationship of the swiss bread constantly hält, the temperature of the base material is the same or it is a low active temperature. An overview of a swiss bread knitter and flacher, when the building gets warm from it, Roithinger exudes. “The performance correction ensures that the soft drink Lage for Lage always Swiss snack was stacked übereinandergestapelt was possible. ”

A hot start within the warm-up phase on Metall-3D-Druck attacks a heavy criterion. Bind the failure or an exceedance of the hot start ranges that can improve the quality of the results. Fronius dies with the Pulsed-Hot-Start function, while the hot start in Pulsed arcs a continuously burning burner and a constant layer height erzieht. If everything is controlled automatically, no additional installation is necessary.

The Fronius Development Team has CMT a valuable function for optimum 3D printing technology and everything in one line. If the expert team operates in the Fronius Prototype Center, it may also be that there are more solutions for the answers to the question.

Das Extra: 360° Service from the Machbarkeitsstudy to his Nullseries

In the prototype center of Fronius a service package for processing is installed. Here the biggest problems for individual purchases and the additional production processes of the best or very complex construction realization are realized. Through the development and production of machines with the production and production of parts, everything is in the power to make the automatic processing and a high degree of discretion possible. Ziel ist, the Time-to-Market is minimized and the potential of innovation and technology in the best projects is achieved.

The experts and experts work together with the fertilization of the existing prototypes and the creation of a reibungslose installation in the additive fertilization prototypes. It is possible to validate the validity of the Recommendations of Swift Process, Economics, Quality and Umsetzungsopties or the Costs for the Prototyp from the start of production. With a 900 m² prototype center in Wels, Austria, more robotization and analysis and bietet services including offline programs and simulations, metallurgical processing, 3D construction processing, more data documentation and much more are performed.

Fronius has involved the Schweßpotenzial der Kunden

We will present the 3D-Complete Bot überzeugen from 19. to 22. November 2024 at Formnext in Frankfurt am Main, Stand C99, Halle 12.0, or at the ADIPEC Messe in Abu Dhabi, from 4. to 7. November 2024, Halle 14, Stand 14316, Opportunity dazu. The Fronius experts are happy with the new Angebote and Möglichkeiten personal suggestions. All interests, Fronius know-how in 3D printing and individual complex software solutions can be profitable and the specialisms work in the Fronius prototype center.