Photon Mono M7 Max: 3D printing for sharp details and large printed circuit boards starts with offers and gifts

Anycubic is equipped with the Photon Mono M7 Max and is therefore suitable for its display. If you work with a new 3D printer, you work with photosensitive Harz and dementias that are not on an advanced plastic work, then there is no problem. Vorbesteller can no longer afford his model at a price of 749 euros – and it is no longer directly from Hersteller, under the hand of Händlern in Germany. 3D Jake will be released on January 17. Bei Anycubic erhalten Vorbeteller nor diverse Zugaben.

The 3D printer comes with a 13.6-inch image, but with a 7K display and a 6,480 x 3,600 pixel display. The XY lift with a diameter of 46 x 46 μm can have a maximum printing speed of up to 4 seconds – with a thickness of 0.05 millimeters. There is a pressure of 31 millimeters in the display-possible signal, which, as it were, gives the height of the models. Unterstützt with a printing range of 298 x 164 x 300 millimeters, the dementenprechend welding themselves with the resin printer and relatively large models finished.

If the Harz in Photon Mono M7 Max is at a temperature of 25°C, Nutzer can set a different temperature at 20 and 40°C. Harzrückstände were carried out automatically, which can cause problems with the light and solve dementia. Verbaut is a 4.3 larger touchscreen. WiFi is available, the leveling is carried out automatically. A Luftfilter is no longer active, but may last for a while.

Possible alternative: the Anycubic Photon Mono M7 Pro at Amazon